Valor BR622 Installer's Manual page 8

3.UNPACKING
The items required for this appliance are packed
in two sections.
Section 1 - Fire Unit contains:
1 Burner & Convection box Unit
1 Nut & olive for 8mm inlet pipe
1 Flue restrictor plate
3 Screws (For flue restrictor)
1 Ceramic back wall
1 Pair of ceramic side walls
1 Front coal
1 Main coal bed
1 Pack of loose coals containing 1 large,
8 medium & 2 small coals
2 Small "U" seals for convection box
side flanges
1 Strip of floor sealing tape
4 Fibre plugs
4 Woodscrews
2 Fire retaining cables
2 Cable clamps
2 Eyebolts
1 Knurled shouldered screw for control
linkage fixing
1 PP3 Battery
1 Smoke match tube
9 Machine screws (5mm) (For use with kit
617K)
1 Users instruction booklet
Section 2 - "Adorn" Fire Front contains:
1 Fire front surround with sliding control
1 Bottom front cover casting
1 Canopy Shield
3 Tapping screws for canopy shield
2 Machine screws for front surround fixing
or
Section 2 - "Visage" Fire Front contains:
1 Fire front surround with sliding control
1 Fire front casting
1 Bottom front cover casting
1 Canopy shield
2 Front surround securing brackets
3 Tapping screws for canopy shield
4 Machine screws for front surround &
securing brackets
or
INSTALLER GUIDE
Section 2 - "Icon" Fire Front contains:
1
1
1
3
2
2
figure 6
Page 8
Fire front surround with sliding control
Bottom front cover
Top shield
Tapping screws for top shield
Machine screws for front surround fixing
Knurled screws for bottom front cover
fixing
Carefully remove all the contents. Take
special care in handling the ceramic walls
and the coals. Take care not to bend or
distort the slide control linkage when
handling the fire front surround.
Check that all the listed parts are present
and in good condition.
Pack Contents