Example - HP XP20000 User Manual

Operand
LDEVEachOfCU
CU-id]:[LDKC-CU-
id]][ ...]|internal|vir-
tual]

Example

The following example exports statistics about host bus adapters and XP Performance Control groups:
group PortWWN
group PPCG
The following example exports statistics about three ports (CL1-A, CL1-B, and CL1-C):
group Port CL1-A:CL1-C
The following example exports statistics about six ports (CL1-A to CL1-C, and CL2-A to CL2-C)
group Port CL1-A:CL1-C CL2-A:CL2-C
The following example exports statistics about the parity group 1-3:
group PG 1-3:1-3
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is larger than 1-3 (for example, 1-4 and 1-5):
group PG 1-3:
The following example exports statistics about the external volume groups E1-1 to E1-5:
group PG E1-1:E1-5
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is smaller than 1-3 (for example, 1-1 and 1-2):
Description
Use this operand when you want to export statistics about volumes which are
displayed in the LDEV tab of the Auto LUN window. By using this operand, you
can export monitoring data at volumes controlled by a particular CU. When statistics
are exported to a ZIP file, multiple ZIP files whose names begin with LDEV_ will
be output. For details on the statistics exported by this operand, see
24 on page 117.
When you specify variables LDKC-CU-id, you can narrow the range of LDKC:CUs
that control the volumes whose monitoring data is to be exported. LDKC-CU-id is
[[[LDKC-
an ID of an LDKC:CU. The colon (:) indicates a range. For example, 000:105
indicates LDKC:CUs from 00:00 to 01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the
LDKC-CU-id value on the right of the colon. For example, you can specify
LDEVEachOfCU 000:105, but you cannot specify LDEVEachOfCU 105:000.
If internal is specified, you can export statistics about volumes in the parity group.
If virtual is specified, you can export statistics about volumes in the external volume
group, V-VOL group, or migration volume group.
If LDKC-CU-id, internal, or virtual is not specified, the monitoring data of all the
volumes will be exported. Either LDKC-CU-id, internal, or virtual can be specified.
XP24000/XP20000 Performance Monitor User Guide
Table
147