Shortrange Subcommand; Syntax; Description; Operands - HP XP20000 User Manual

group LDEV :1-3
The following example exports statistics about LU paths for the host group (host storage domain) ID
01 for the port CL1-A:
group LU CL1-A.01:CL1-A.01

shortrange Subcommand

Syntax

shortrange

Description

The shortrange command enables you to specify a term of monitoring data to be exported into files.
Use this command when you want to narrow the export-target term within the stored data.
The shortrange command is valid for monitoring data in short range. The monitoring data in short
range is the contents displayed in the following windows:
The Auto LUN window with selecting shortrange as the storing period
The Continuous Access Monitor and TC MF Monitor windows
The Continuous Access Journal Monitor and UR MF Monitor windows
All the monitoring items are stored in short range. Therefore, you can use the shortrange command
whichever operand you specify to the group command. If you run the Export Tool without specifying
the shortrange command, the data stored in the whole monitoring term will be exported.
The login command must execute before the shortrange command executes.

Operands

The value on the left of the colon (:) specifies the starting time of the period. The value on the right of
the colon specifies the ending time of the period. Specify the term within Short Range From XXX
To XXX which is output by the show command.
If no value is specified on the left of the colon, the starting time for collecting monitoring data is
assumed. If no value is specified on the right of the colon, the ending time for collecting monitoring
data is assumed. The starting and ending times for collecting monitoring data are displayed in the
Monitoring Term area in the Auto LUN window.
Figure 47 Starting and Ending Time for Collecting Monitoring Data
.
148 Using the Export Tool
[[yyyyMMddhhmm][{+|-}hhmm]:[yyyyMMddhhmm][{+|-}hhmm]]