HP XP20000 User Manual page 121

This script specifies that you are logging into the SVP whose IP address is 158.214.135.57.
You must log into the SVP when using the Export Tool.
The svpip command specifies the IP address of the SVP. You must include the svpip command
in your command file. For detailed information about the svpip command, see
mand" on page 131.
login expusr passwd
This script specifies that you use the user ID expusr and the password passwd to log into the SVP.
The login command logs the specified user into the SVP. You must include the login command
in your command file. For detailed information about the login command, see
mand" on page 132.
CAUTION:
When you write the login command in your command file, you must specify a user ID that should
be used exclusively for running the Export Tool. See
Tool" on page 118 for reference.
show
The show command checks the SVP to find the period of monitoring data stored in the SVP and
the data collection interval (that is called gathering interval in Performance Monitor), and then
outputs them to the standard output (for example, the command prompt) and the log file.
Performance Monitor collects statistics by the two types of storing periods: in short range and in
long range. The show command displays the storing periods and the gathering intervals for these
two types of monitoring data.
The following is an example of information that the show command outputs:
Short Range From: 2006/10/01 01:00
Long Range From: 2006/09/01 00:00
Short Range indicates the storing period and gathering interval of the monitoring data stored
in short range. Long Range indicates those of the monitoring data stored in long range. In the
above example, the monitoring data in short range is stored every 1 minute in the term of 1:00-
15:00 on Oct. 1, 2006. Also, the monitoring data in long range is stored every 15 minutes in
the term of Sep. 1, 2006, 0:00 through Oct. 1, 2006, 15:00. When you run the Export Tool,
you can export monitoring data within these periods into files.
All the monitoring items are stored in short range, but a part of monitoring items is stored in both
the short range and long range. For details on monitoring items that can be stored in long range,
see "longrange Subcommand" on page 150.
The use of the show command is not mandatory, but it is recommended that you include the show
command in your command file. If an error occurs when you run the Export Tool, you might be
able to find the error cause by checking the log file for information issued by the show command.
For detailed information about the show command, see
group PhyPG Long and group RemoteCopy
The group command specifies the type of data that you want to export. Specify a operand follow-
ing group to define the type of data to be exported. Basically, monitoring data stored in short
range is exported. But you can direct to export monitoring data stored in long range when you
specify some of the operands.
The script group PhyPG Long in
groups in long range. Also, the script group RemoteCopy specifies to export statistics about
"Requirements for Using the Export
- To: 2006/10/01 15:00
- To: 2006/10/01 15:00
"show
Figure 38 specifies to export usage statistics about parity
XP24000/XP20000 Performance Monitor User Guide
"svpip Subcom-
"login Subcom-
Interval : 1min.
Interval : 15min.
Subcommand" on page 133.
121