HP XP20000 User Manual page 146

Operand
URLU [[port-
name.host-group-id]:[port-
name.host-group-
id]][ ...]
URLDEV [[LDKC-CU-
id]:[LDKC-CU-id]][ ...]
146 Using the Export Tool
Description
Use this operand when you want to export statistics about remote copy operations
which are displayed in the Continuous Access Journal Monitor window and the
UR MF Monitor window. By using this operand, you can export monitoring data
about remote copy operations performed by XP Continuous Access Journal and
Universal Replicator for Mainframe at each LU path. When statistics are exported
to a ZIP file, the file name will be URLU_dat.ZIP. For details on the statistics
exported by this operand, see
When you specify variables port-name.host-group-id, you can narrow the range
of LU paths whose monitoring data are to be exported. port-name is a port name.
host-group-id is the ID of a host group. The host group ID must be a hexadecimal
numeral. The colon (:) indicates a range. For example, CL1-C.01:CL1-C.03
indicates the range from the host group #01 of the CL1-C port to the host group
#03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right
of the colon. Note that the smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates which port-name value
is smaller than which port-name value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a
< ... < CL4-r
For example, you can specify URLU CL1-C.01:CL2-A.01, but you cannot
specify URLU CL2-A.01:CL1-C.01. Also, you can specify
URLU CL1-C.01:CL1-C.03, but you cannot specify
URLU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all the LU paths
will be exported.
Use this operand when you want to export statistics about remote copy operations
which are displayed in the Continuous Access Journal Monitor window and the
UR MF Monitor window. By using this operand, you can export monitoring data
about remote copy operations performed by XP Continuous Access Journal and
Universal Replicator for Mainframe at volumes controlled by each CU. When
statistics are exported to a ZIP file, multiple ZIP files whose names are beginning
with URLDEV_ will be output. For details on the statistics exported by this operand,
see Table 23 on page 115.
When you specify variables LDKC-CU-id, you can narrow the range of LDKC:CUs
that control the volumes whose monitoring data is to be exported. LDKC-CU-id is
an ID of an LDKC:CU. The colon (:) indicates a range. For example, 000:105
indicates LDKC:CUs from 00:00 to 01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the
LDKC-CU-id value on the right of the colon. For example, you can specify URLDEV
105:000.
If LDKC-CU-id is not specified, the monitoring data of all the volumes will be
exported.
Table 22 on page 115.