HP XP20000 User Manual page 142

Operand
PortWWN [[port-
name]:[port-
name]][ ...]
LU [[port-name.host-
group-id]:[port-name.host-
group-id]][ ...]
142 Using the Export Tool
Description
Use this operand when you want to export statistics about host bus adapters
(WWNs) connected to ports, which are displayed in the Port-LUN tab of the Auto
LUN window. When statistics are exported in a ZIP file, the file name will be
PortWWN_dat.ZIP. For details on the statistics exported by this operand, see
Table 12 on page 105.
When you specify variables port-name, you can narrow the range of ports whose
monitoring data are to be exported. port-name is a port name. The colon (:)
indicates a range. For example, CL3-a:CL3-c indicates ports from CL3-a to
CL3-c.
Ensure that the port-name value on the left of the colon is smaller than the port-name
value on the right of the colon. Note that the smallest port-name value is CL1-A
and the largest port-name value is CL4-r. The following formula illustrates which
value is smaller than which value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a
< ... < CL4-r
For example, you can specify PortWWN CL1-C:CL2-A, but you cannot specify
PortWWN CL2-A:CL1-C. Also, you can specify PortWWN CL3-a:CL3-c, but
you cannot specify PortWWN CL3-c:CL3-a.
If port-name is not specified, the monitoring data of all the host bus adapters will
be exported.
Use this operand when you want to export statistics about LU paths, which are
displayed in the Port-LUN tab of the Auto LUN window. When statistics are exported
in a ZIP file, the file name will be LU_dat.ZIP. For details on the statistics exported
by this operand, see Table 13
When you specify variables port-name.host-group-id, you can narrow the range
of LU paths whose monitoring data are to be exported. port-name is a port name.
host-group-id is the ID of a host group (that is, a host storage domain). The host
group (host storage domain) ID must be a hexadecimal numeral. The colon (:)
indicates a range. For example, CL1-C.01:CL1-C.03 indicates the range from
the host group #01 of the CL1-C port to the host group #03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right
of the colon. Note that the smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates which port-name value
is smaller than which port-name value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a
< ... < CL4-r
For example, you can specify LU CL1-C.01:CL2-A.01, but you cannot specify
LU CL2-A.01:CL1-C.01. Also, you can specify LU CL1-C.01:CL1-C.03,
but you cannot specify LU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all the LU paths
will be exported.
on page 105.