Table of Contents
Advertisement
Operation
The Autoset menu is not available in DVI mode.
Name
Full Autoset
Automatic Gain
Automatic Geometry
Automatic Phase
When do you need to use the Autoset function?
• The first time you use the display with analog video connected.
• After connecting or selecting another analog video source (e.g.,
changing the PC resolution).
• In case you notice the image geometry or positioning is not as
desired.
Required test pattern
To obtain good results with the autoset functions, it is necessary to have
a good image on which to perform the functions.
E.g., a maximized Windows Explorer window would be a good image.
• Automatic Geometry: The edges of the image should have an
intensity of at least 15% video amplitude. .
Description
Perform all Autoset functions (below) one
after another
Adjust the video levels (black and white)
automatically
Adjust the image geometry automatically.
This function displays the complete active
video in the center of the screen.
If the video resolution is smaller than the
native panel resolution and no scaling is
selected (see further), it puts black bor-
ders around the active video window.
If the video resolution is larger than the
native panel resolution and no scaling is
selected, the edges of the image will be
lost.
Adjust the video sampling phase and fre-
quency automatically. This is necessary
when you notice vertical or horizontal
banding or noise in the image.
29
Hide quick links:
Advertisement
Table of Contents
