GE 20 Owner's Manual And Installation Instructions page 26

REVERSING THE DOOR SWING
REHANG REFRIGERATOR DOOR
9
Lower the refrigerator door onto the center hinge
A
pin. Ensure that the plastic hinge pin thimble is on
the center hinge pin or inside door hinge pin hole
located in the bottom of the door.
Insert the door thimble into the hinge hole on
B
top of the refrigerator door and then insert the
top hinge pin. Make sure the door is aligned
with the cabinet. Attach the hinge to the top of
the cabinet loosely with the bolts.
Thimble
Make sure the gasket on the door is flush against
C
the cabinet and is not folded. Support the door on
the handle side and make sure the door is straight
and the gap between the doors is even across the
front. While holding the door in place, tighten the
top hinge bolts. Replace the hinge cover.
Installation Instructions
(cont.)
26
INSTALL THE LOGO BADGE
10
Remove the adhesive backing paper
and align the pins on the back of the badge
with the holes in the door. Apply pressure to the
badge to ensure it sticks to the door.