Table of Contents
Advertisement
The tank can have some
water when the display
shows: Water required.
Wait until the water flow
from the water outlet
valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water
to fill the water tank again.
6.10 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
Minute Minder
Duration
End Time
6.11 Fast Heat Up Indicator
This function decreases the heat-up
time.
To activate the function, hold
seconds. The heat-up indicator
alternates.
6.12 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min).
This function has no effect on the opera‐
tion of the appliance.
Use
to activate the function. Press
or
to set the minutes and
To set the length of an operation (max. 23
h 59 min).
To set the switch-off time for a heating
function (max. 23 h 59 min).
ENGLISH
15
for 3
to start.
Advertisement
Table of Contents
