Setting A Later End Time; Setting The Clock; Memory; Saving Settings In The Memory - Siemens HB76A1.60S Instruction Manual

Changing the cooking time
0
Use the button to select the
Î
cooking time using the rotary selector. Press the
repeatedly until the rotary symbol disappears from the
clock display. The modified cooking time can be seen counting
down.
Calling up the clock, cooking time and end time
You can call up all the functions with the

Setting a later end time

A later end time can be set for
all types of heating
■
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time must be set. Operation must not
have started.
0
Use the button to select the
1.
The end time appears. This is the time at which the meal will
be ready
RQ
3 0
RII

Memory

You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
12
Nx
0
cooking time. Change the
button
0
clock button.
Ny
end time.
VWDUW
ƒ&NJ
VWRS
Using the rotary selector, set a later end time.
2.
0
Press the button repeatedly until the
3.
disappears from the clock display.
†
Press the button.
4.
The oven goes into standby. The
time that has been set is shown on the clock display. As soon
as operation starts, you will see the cooking time counting
down.
The cooking time has elapsed
A signal sounds. The oven stops heating.
0
clock display. You can stop the audible signal by pressing
the button.
Correcting the end time
0
This is only possible as long as the oven is in standby. Use
the button to select the
Î
using the rotary selector. Press the
the rotary symbol disappears from the clock display. The
new end time is applied.

Setting the clock

The oven must be switched off before you can set or change
the clock.
Following a power cut
‹ ‹‹
Following a power cut, :
display. Set the current time.
0
Press the button.
1.
‚ƒ ‹‹
The arrow is next to the symbol for the cooking N0
time . : is shown in the clock display.
2. Turn the rotary selector to set the current time.
0
Press the button.
3.
The menu is exited. The current time is shown in the clock
display.
Changing the clock
0
If you wish to change the time from summer to winter time, for
N0
example, press the button twice. The arrow is next to
the symbol for the clock. Then proceed as described in
points 2 and 3.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.

Saving settings in the memory

The self-cleaning function cannot be saved.
Specify the type of heating, temperature and, if required, a
1.
cooking time for the dish you wish to cook, or select a
programme. Do not start.
ƒ&NJ
Î
rotary symbol
†
button lights up. The end
‹ ‹‹
: is shown on the
Ny
0
end time. Adjust the end time
button repeatedly until
0
and the symbol are lit in the
VWDUW
VWRS