Table of Contents
Advertisement
Changing the timer time
Open the menu with the
0
to change the time. Press the
rotary symbol disappears from the clock display. The menu is
exited. The new time counts down.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for
180 °C, cooking time of 45 minutes.
Press the
button twice.
0
1.
The arrow is next to the
The
rotary symbol above the two dots indicates that the
Î
cooking time can be set using the rotary selector
Set the cooking time using the rotary selector.
2.
Press the
button repeatedly until the
0
3.
disappears from the clock display.
The setting is adopted.
If the operation has not yet started, press the
4.
You will see the cooking time counting down on the clock
display.
The cooking time has elapsed
A signal sounds. The oven stops heating.
the clock display. You can cancel the audible signal earlier by
pressing the
0
button.
Cancelling the cooking time
Use the
button to select the
0
rotary selector to reset the cooking time to
button repeatedly until the
the clock display.
Changing the cooking time
Use the
button to select the
0
cooking time using the rotary selector. Press the
repeatedly until the
rotary symbol disappears from the
Î
clock display. The modified cooking time can be seen counting
down.
Calling up the clock, cooking time and end time
You can call up all the functions with the
12
button and use the rotary selector
button repeatedly until the
0
top/bottom heating,
%
symbol for the cooking time.
Nx
rotary symbol
Î
button.
†
:
is shown on
‹
‹‹
cooking time. Use the
Nx
:
. Press the
‹
‹‹
rotary symbol disappears from
Î
cooking time. Change the
Nx
0
clock button.
0
Setting a later end time
A later end time can be set for
Î
all types of heating
■
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time must be set. Operation must not
have started.
Use the
0
1.
The end time appears. This is the time at which the meal will
be ready
Using the rotary selector, set a later end time.
2.
Press the
3.
disappears from the clock display.
Press the
4.
The oven goes into standby. The
time that has been set is shown on the clock display. As soon
as operation starts, you will see the cooking time counting
down.
0
The cooking time has elapsed
A signal sounds. The oven stops heating.
clock display. You can stop the audible signal by pressing
the
button.
0
Correcting the end time
button
This is only possible as long as the oven is in standby. Use
the
button to select the
0
using the rotary selector. Press the
the
rotary symbol disappears from the clock display. The
Î
new end time is applied.
button to select the
Ny
button repeatedly until the
0
button.
†
button lights up. The end
†
end time. Adjust the end time
Ny
0
end time.
rotary symbol
Î
:
is shown on the
‹
‹‹
button repeatedly until
Advertisement
Table of Contents
