To Install Batteries - Panasonic DMW-FL28E Operating Instructions Manual

Hide thumbs


To install batteries (type used: four AA size alkaline,
nicad or nickel metal hydride)
1. Slide the battery compartment lid to open as illustrated.
2. Put four batteries into the compartment correctly as indicated in diagram.
3. Close the battery compartment lid.
• Batteries are not supplied. Please purchase separately.
• Be sure to use the same type of batteries.
• Make sure that the batteries are inserted with correct polarities. If they are
inserted incorrectly, the flash will not light and leakage of liquid or an
explosion may be caused.
• When using nicad or nickel metal hydride batteries, recharge them with
dedicated chargers.



  Also See for Panasonic DMW-FL28E

Table of Contents