DMW-FL28PP / DMW-FL28E 2 DISASSEMBLY & ASSEMBLY PROCEDURE Refer to the “DISASSEMBLY DIAGRAM”. 2.1. DIASSEMBLY PROCEDURE 1. Remove the battery lid unit (Ref. No. 18). 2. Unscrewed 4 screws (B16 - B19), and then remove the shoe unit (Ref. No. 43).
DMW-FL28PP / DMW-FL28E 4 CIRCUIT DESCRIPTION Refer to the “SCHEMATIC DIAGRAM”. 4.1. Operation for control circuit power supply When the position of the rotary switch A is changed from OFF to other position (AUTO/C AUTO/MANUAL/SLAVE), RQ2 turns ON. Then it starts to supply the control power.
2. When the power switch is ON after above symptom, normal operation for oscillation, charging, lighting and flashing is performed. 3. When the power switch is OFF after symptom 2, it occurred symptom 1. Cause: Q3 is shorting. Service point: Replace Q3. DMW-FL28PP / DMW-FL28E...
Need help?
Do you have a question about the DMW-FL28PP and is the answer not in the manual?
Questions and answers