Notes for AUTO recording
• If the background is extremely dark compared to the subject and its reflectance is low, adjust the aperture setting down
by approx. 1/2 EV. On the other hand, if the subject has a high reflectance like a white wall, adjust the aperture setting
upward by approx. 1/2EV. If the background is a mirror, etc., Its excessively high reflectance causes a malfunction of
the auto circuit. If this happens, switch to manual mode operation.
• If the AUTO recording is used outdoors in daytime, a malfunction of the auto circuit may occur as the ambient light is
• If there are any obstructive objects between the camera and the subject, the auto circuit will not operate properly.
• For special recording such as daylight recording, use the flash in the manual mode.