Auto Check Indicator; Selecting The Aperture For Use With Analog Cameras - Panasonic DMW-FL28E Operating Instructions Manual

Auto check indicator

If the auto check indicator lights at the instant of pressing the test flash
button, it indicates that the auto circuit is operating. If the auto check
indicator does not light, the subject is beyond the auto-effective distance.
Adjust either the auto F number with the rotary switch B 2 or the distance to
the subject.
Selecting the aperture for use with Analog Cameras (for
close-up AUTO recording (AUTO ))
1. Fit the wide panel onto the flashtube and set the rotary switch A 1 to
[AUTO ] as illustrated.
2. Set the F number on the camera in accordance with ISO sensitivity in use.
As long as the subjects are within the auto-effective distance, the flash
automatically adjusts the amount of light. You do not have to vary the F
number to get correct exposures.
12
2
M GN AUTO F
N W AUTO(W)
∼5m
28 20 16 5.6
(∼3.5m)
∼7m
14 10 11 4
(∼5m)
∼10m
7 5 8 2.8
(∼7m)
ISO100 AUTO 0.7m∼(W 0.5m∼)
GN
F＝
m
SLAVE
AUTO CHECK
MANUAL
PL
AUTO
AUTO
OFF
TEST
1
LOOK