Changing The Fm Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format); Restoring The Default Settings (Init); Checking The Firmware Version (Version) - Yamaha HTR-2067 Owner's Manual

Changing the FM tuning frequency setting (TU)

(Asia and General models only)
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
TU••••••••FM50 ADAPTIVE DRC
Change the FM tuning frequency setting of the unit depending on your listening
environment.
Settings
Select this when you want to adjust the FM frequency by 100-kHz
FM100
steps.
Select this when you want to adjust the FM frequency by 50-kHz
FM50
steps.

Switching the video signal type (TV FORMAT)

CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT
VOL.
ECO
TV FORMAT•NTSC ADAPTIVE DRC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
Canada and General models: NTSC
Other models: PAL
VIRTUAL
VIRTUAL

Restoring the default settings (INIT)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
INIT••••CANCEL
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.

Checking the firmware version (VERSION)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL
SLEEP
MUTE
VOL.
ADAPTIVE DRC VIRTUAL
51
En