Front View; Side View - Monogram ZIC360NHRH Installation Manual

Monogram 36" Built-In Bottom-freezer Refrigerator
®
3/4" or 1/2" DUAL INSTALLATIONS
4 5/16"
A
(10.9)
5 1/2"
ELEC.
(13.9)
9"
(22.9)
85"
(215.9)
Finished
Opening
WATER
3 1/2"
7" (9.0)
(17.8)
15" 1"
(38.1) min
FLUSH INSET 1/2" PANEL DIMENSIONS DUAL INSTALLATION
To wall (2.5)
A
Grille Panel
115˚
Door swing
Fresh
Food
Panel
Freezer Drawer Panel
PANEL DIMENSIONS
A
1/4" Backer Panel 69 7/8"
.10" Space Panel 68 1/2"
1/2" Overlay Panel 74 1/2" 10 11/16" 46 9/16" 22 7/16"
75"
(190.5)
Finished Width
24 3/16"
(61.4)
5 1/2"
ELEC.
(13.9)
9"
(22.9)
WATER
3 1/2"
7 1/2" 7 1/2" (9.0) 7"
(19.1) (19.1) (17.8)

FRONT VIEW

15"
(38.1) min
To wall
B
E
115˚
Door swing
Fresh
Food
C
Panel
Freezer Drawer Panel D
B C D
8 7/8" 46 1/16" 21 7/8"
7 5/8" 44 11/16" 20 1/2"
ZIC360NHLH_ZIC360NHRH
26 3/16"
Min. Cutout Depth
75 1/2"
(191.8 )
From floor
to bottom
of electrical
area
3 1/2"
(8.9)

SIDE VIEW

E
33 7/8"
32 1/2"
36 7/8"
FLUSH INSET INSTALLATION
(66.5)
NOTES
Trimmed refrigerators are designed to be
customized with decorative panels. Field-
installed 1/2" or 3/4" custom door, drawer
and grille panels are required. For 3/4"
raised panels, routing is required. The router
depth is 1/4" all the way around the panel's
backs. Additional panel width reductions
are required per the diagrams shown. This
will create "picture frame' routing allowing
the panels to slide into the attached door,
drawer and grille trims.
A A separate 115V, 60Hz, 15- or 20-amp
power supply is recommended for each
product.
Maximum total panel weight:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Unified grille panel – 25 lbs
Door Handles
3 1/2"
Door handles not included. Custom handles
(8.9)
supplied by your cabinet maker may be used.
W
ZKHPSS1: Professional tubular stainless steel
handle designed to fit custom panels. Kit
includes one handle – 30 1/2" long. Order
2 kits from your Monogram supplier.
ZKHCSS2: Custom European tubular handle
designed to fit custom panels. Kit includes 2
handles. Door handle is 44 3/16" and drawer
handle is 33 3/16".
Order ZUG2: Unified grille kit for
dual installation. Maximum total panel
weight - 25 lbs.
ZKHCT: Handle side trim for left-hand and
right-hand door. For use on a custom panel
when using a custom handle.
The 1/2" overlay panel must be secured to
a .10" spacer panel and a 1/4" thick backer
panel, which slides into the trim.
Assemble the panels with glue and screws:
• Center the spacer panel on the backer
panel, left to right and top to bottom. Secure
the panels with glue.
• Refer to the chart for locating the backer
panel to the overlay panel. Secure the
overlay panel to the backer panel with glue
and screws. Screws must be countersunk
into the backer panel
ZIC360NHRH
Product Specification Revised 5/16