Monogram ZIC360NHRH Installation Manual page 5

Monogram 36" Built-In Bottom-freezer Refrigerator
®
3/4" RAISED GRILL PANEL ROUTING
DETAIL TOP
1-11/16"
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
3/16"
DETAIL BOTTOM
2-1/16"
LEFT
SIDE
3/4" RAISED DRAWER PANEL ROUTING
DETAIL TOP
3/4"
11/32"
1/4"
7/16"
1/4"
3/16"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2 1/16"
LEFT
SIDE
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
NOTE: Routed areas should be
finished as they may be visible
when assembled.
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
ROUTER DEPTH 1/4"
2 1/16"
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
Front
Back
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
3/32"
1/4"
3/4" PANEL SIDE VIEW
2-1/16"
(AFTER ROUTING)
RIGHT
SIDE
TOP
Front
Back
DETAIL RIGHT
SIDE
BOTTOM
RIGHT
SIDE
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
FLUSH INSET INSTALLATION
TOP
NOTES
Trimmed refrigerators are designed to be
customized with decorative panels. Field-
installed 1/2" or 3/4" custom door, drawer
and grille panels are required. For 3/4"
raised panels, routing is required. The router
depth is 1/4" all the way around the panel's
Front
backs. Additional panel width reductions
are required per the diagrams shown. This
will create "picture frame' routing allowing
the panels to slide into the attached door,
drawer and grille trims.
Maximum total panel weight:
• Fresh food door panels – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 11 lbs
BOTTOM
Note: For panels constructed with rails and
stiles (5-panel), the rails must be a minimum
of 3" wide and stiles must be a minimum of
4" wide.
Door Handles
Door handles not included. Custom handles
supplied by your cabinet maker may be used.
ZKHPSS1: Professional tubular stainless steel
handle designed to fit custom panels. Kit
includes one handle – 30 1/2" long. Order
2 kits from your Monogram supplier.
ZKHCSS2: Custom European tubular handle
designed to fit custom panels. Kit includes 2
handles. Door handle is 44 3/16" and drawer
handle is 33 3/16".
Order ZUG2: Unified grille kit for
dual installation. Maximum total panel
weight - 25 lbs.
ZKHCT: Handle side trim for left-hand and
right-hand door. For use on a custom panel
when using a custom handle.
Front
Product Specification Revised 5/16
ZIC360NHRH