Monogram ZIC360NHRH Installation Manual page 16

Monogram 36" Built-In Bottom-freezer Refrigerator
®
STANDARD 3/4" OVERLAY PANEL DIMENSIONS DUAL INSTALLATION
A
Grille Panel
Fresh
2 5/16" Food
(5.9)
Panel
6"
ELEC.
(15.2)
10"
(25.4)
Freezer Drawer Panel
83 1/2" min
84 1/2" max
(212.1-214.6)
Finished Opening
PANEL ASSEMBLY
CROSS SECTION
WATER
3 1/2"
(9.0)
5"
(12.7)
DUAL PRODUCT CLEARANCES
A
25" min
1"
(63.5)
(2.5)
To wall
130˚
Door swing
B
E
71 1/2"
(181.6)
Fresh
Finished Width
Food
24 3/16"
C
Panel
6"
ELEC.
(15.2)
10"
(25.4)
D
Freezer Drawer Panel
Door
3/4" Overlay Panel
Supplied Handles
WATER
3 1/2"
(9.0)
5 3/4" 5 3/4"
(14.6) (14.6)
FRONT VIEW
25" min
(63.5)
To wall
130˚
Door swing
PANEL DIMENSIONS
1/4" .10"
Backer Spacer
Panel Panel
A 69 7/8" 68 1/2"
B
8 7/8" 7 5/8"
C
46 1/16" 44 11/16"
D
21 7/8" 20 1/2"
(61.4)
E 33 7/8" 32 1/2"
.25" + .10" + .75" =
1.10" Total Panel Thickness
75"
(190.5 )
Trim
From floor
to bottom
1/4" Backer Panel
of electrical
area
.10" Spacer Panel
5" 3 1/2"
(12.7) (8.9)
STANDARD INSTALLATION
NOTES
3/4"
3/4" Overlay Panels:
Overlay
Panel
The decorative panels slide into the trim. The
70 1/8"
overlay panel must be secured to a 1/4"-thick
backer panel which slides into the trim. A
9"
spacer panel 0.10" thick must be placed
46 5/16"
between the overlay and backer panels.
24"
(60.9)
Center each panel over the other. Assemble
Min. Cutout Depth
22"
the panels with glue and screws. Screws must
34 1/8" be countersunk into the backer panel.
NOTE: Left-to-right offset is not always equal
to top-to-bottom offset.
Maximum total panel weight:
• Fresh food door panel – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille panel – 25 lbs.
Order ZUG2: Unified grille kit for dual
installation
Door Handles:
The supplied handles can be adjusted to
accommodate both framed or overlay panels.
Custom handles of your choice, supplied by
your cabinet maker, can also be installed.
ZKHPSS1: Professional tubular stainless steel
handle designed to fit 3/4" overlay panels.
ZKHCSS2: European tubular handle designed
to fit 3/4" panels. Kit includes 2 handles.
Door handle is 44 3/16" and drawer handle
is 33 3/16".
10"
(25.4)
WATER
SIDE VIEW
A In a side-by-side installation of a left-
and-right-hand door swing product, 1"
clearance between the units is required.
Order ZUG2: custom panel unified grille kit for
one continuous grille panel.
Product Specification Revised 5/16
ZIC360NHRH