Monogram ZIC360NHRH Installation Manual page 7

Monogram 36" Built-In Bottom-freezer Refrigerator
®
FLUSH INSET 1/2" PANEL DIMENSIONS
A
B
Grille Panel
Fresh
Food
C
Panel
Freezer Drawer Panel D
1/2" OVERLAY PANEL ROUTING DIMENSIONS
Grille Back
C
A
C
Hinge Side
Door Panel Back
Backer with
Overlay Panel
Assembly
A
D
C
Freezer Drawer
A
D
PANEL DIMENSIONS
A
1/4" Backer Panel 33 7/8"
.10" Space Panel 32 1/2"
1/2" Overlay Panel 38"
B
D
PANEL DIMENSIONS
Fresh Food Panel
B
Freezer Panel
Grille Panel
B
B C D
8 7/8" 46 1/16" 21 7/8"
7 5/8" 44 11/16" 20 1/2"
10 11/16" 46 9/16" 22 7/16"
Door
1/2"
Overlay
Panel
1/4"
.10"
Backer
Panel Spacer
A B C
2 1/16" 2 1/16" 5/16"
2 1/16" 2 1/16" 5/16"
2 1/16" 2 1/16" 1 11/16"
FLUSH INSET INSTALLATION
NOTES
The 1/2" overlay panel must be secured
to a .10" spacer panel and a 1/4" thick
backer panel, which slides into the trim.
Assemble the panels with glue and
screws:
• Center the spacer panel on the backer
panel, left to right and top to bottom.
Secure the panels with glue.
• Refer to the chart for locating the backer
panel to the overlay panel. Secure
the overlay panel to the backer panel
with glue and screws. Screws must be
countersunk into the backer panel
Order ZUG2: Unified grille kit for dual
installation. Maximum total panel
weight – 25 lbs.
Note: For panels constructed with rails
and stiles (5-panel), the rails must be a
minimum of 3" wide and stiles must be a
minimum of 4" wide.
D
3/16"
3/16"
3/16"
Product Specification Revised 5/16
ZIC360NHRH