Initializing The Unit - Yamaha YAS-306 Owner's Manual

2
Press the key on the unit.
CONNECT
The firmware update is complete.
NOTE
• If the firmware update fails, the "Failed to update MusicCast device" message will be displayed by the app,
and the indicator at far right on the unit will flash blue. Press the
and try updating the firmware again. If the update fails again, check the network connection.
Follow the procedure below to initialize the unit.
1
2
key to turn unit off and then on again,

Initializing the unit

Turn off the unit.
Hold down the key and press the
indicators flash.
CONNECT
Glows (initialized)
key on the unit until all
SETTINGS ➤ Initializing the unit
32
En