Listening To The Sound From A Bluetooth Device - Yamaha YAS-306 Owner's Manual

Listening to the sound from a
Bluetooth device
Audio from a Bluetooth device, such as a mobile device or a digital music player, can be
played over a wireless connection.
Bluetooth device (such as
a mobile device)
NOTE
• Adjust the volume level of the Bluetooth device as required.
• When the network standby function (p.30) is enabled, the unit turns on with operation of the Bluetooth
device.
• Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each other.
HINT
• See documentation supplied with your Bluetooth device for more information.
1
Press the BLUETOOTH key on the unit's remote control to select
Bluetooth as the input source.
The BLUETOOTH indicator on the unit glows.
If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed. Terminate this
connection to connect a new device.
2
Enable the Bluetooth function on the Bluetooth device.
3
Select "YAS-306 xxxxxx Bluetooth"* in the Bluetooth device list on the
device.
* If the unit is registered as a MusicCast-enabled device (p.19), the room name (network name)
is displayed.
If a passkey (PIN) is required, enter the number "0000".
YAS-306 xxxxxx Bluetooth
When the connection is established, the
The indicator or a completion message is displayed on the Bluetooth device.
4
Play back a song on the Bluetooth
device.
Terminating Bluetooth connection
Perform one of the following operations to terminate Bluetooth connection.
The indicator on the unit turns off when the connection is terminated.
• Turn off the Bluetooth function on the Bluetooth device.
• Press the BLUETOOTH key on the unit's remote control for more than 3
seconds.
• Switch the unit's input source to any input source other than Bluetooth.
• Turn off the unit.
PLAYBACK ➤ Listening to the sound from a Bluetooth device
PIN 0 0 0 0
1 2 3
4 5 6
7 8 9
0
indicator on the unit glows.
Blue
16
En