Playing Back Music Stored On Media Servers (Pcs/Nas) - Yamaha YAS-306 Owner's Manual

Front
Hide thumbs Also See for YAS-306:
Table of Contents

Advertisement

Playing back music stored on media servers (PCs/
NAS)
You can play back music files stored on your PC or DLNA-compatible NAS via the unit.
NOTE
• The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
Supported File formats
File
Sampling frequency (kHz)
WAV*
32 to 192
MP3
8 to 48
WMA
8 to 48
MPEG-4 AAC
8 to 48
FLAC
32 to 192
ALAC
32 to 96
AIFF
32 to 192
* Linear PCM format only
NOTE
• To play back FLAC files stored on a PC or NAS, you need to install server software that supports sharing of
FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
• Digital Rights Management (DRM) contents cannot be played back.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
configure the media sharing setting on each music server.
For a PC with Windows Media Player installed
This unit supports Windows Media Player 11 or later. This section explains Windows
Media Player 12 setup as an example.
NOTE
• Operation may vary depending upon your PC or settings. Refer to documentation provided by your PC's
manufacturer or Windows Media Player Help for details.
The number of
Gapless playback
channels
2
2
2
2
2
2
2
1
Start Windows Media Player 12 on your PC.
2
Select "Stream", then "Turn on media streaming".
3
Click "Turn on media streaming".
4
Select "Allowed" from the drop-down list next to the unit's model
name.
5
Click "OK" to exit.
For a PC or a NAS with other DLNA server software installed
Refer to documentation supplied with the device or software and configure the media
sharing settings.
Playing music files
Use the MusicCast CONTROLLER app installed on your mobile device to play music
files.
NOTE
• Register the unit as a MusicCast-enabled device (p.19) before playing music files.
1
Use the MusicCast CONTROLLER app to select the unit's room
(Room1, etc.).
2
Tap
(Server).
3
Follow the on-screen instructions to select a song.
HINT
• When a music file is registered with No. 1, 2, or 3 in "Favorites" with the MusicCast CONTROLLER app, the
registered music file can be played with the NET RADIO 1, 2, or 3 key on the remote control.
NETWORKS ➤ Playing back music stored on media servers (PCs/NAS)
22
En

Advertisement

Table of Contents
loading

Table of Contents