Contents Supplied items ..............2 Front Surround System Features ................. 3 Frequently asked questions..........3 Part names and functions (sound bar/subwoofer) .... 4 Installation................5 (YAS-CU203+NS-WSW41) Connections................6 Operations................8 Owner’s Manual Listening to the sound from a device....10 Settings ................
(RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment sounds is often undetectable until it is too late, Yamaha has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. • To assure the finest performance, please read this unit, and/or personal injury. Yamaha will not be − places of high temperatures, such as near a (Power key) manual carefully. Keep it in a safe place for future...
Supplied items Make sure you have received all of the following items. How to use the remote control Preparing the remote control Peel off the protection sheet before use. Sound bar (YAS-CU203) Battery x 2 (AAA, R03, UM4) Operating range of the remote control Wireless subwoofer Remote control Optical cable (1.5 m [4.9 ft])
• Advanced Bass Extension Processing The TV’s remote control does not work after the sound bar is installed in Equipped with Yamaha’s original bass boost technology, this system reproduces front of the TV. more powerful sound from the dedicated subwoofer (p.9).
Part names and functions (sound bar/subwoofer) Sound bar (front panel) Sound bar (rear panel) A Indicators A TV input jack Indicate the status of the sound bar. The indicators will dim automatically if no For connecting to a TV with an optical cable (p.6). operations are performed for 5 seconds.
Using clamps other than specified screws, such as short volume is reduced. Install the subwoofer so that it is not hidden Yamaha will bear no responsibility for any accidents caused by screws, nails, and two-sided tape, may cause the sound bar to behind a thick curtain, etc.
Connections Connect to a TV (or other peripheral device). Sound bar (rear) Cautions • Make sure that the power cables of the sound bar and subwoofer are not connected to AC wall outlets when you start making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal.
Analog connection of an external device (game Wireless connection with the subwoofer console) When the power cables of the sound bar and subwoofer are connected to AC wall outlets (p.6) and the sound bar is turned on, the sound bar and subwoofer are You can connect an external device, such as a game console or TV that does not have connected automatically.
Operations ★: Keys that require pressing for more than 3 seconds BLUETOOTH STANDBY, SUBWOOFER PAIRING, Input keys AUDIO DELAY, LEARN, REPEATER Select an input source to be played back. Indicators Remote control signal transmitter TV ....TV audio BD/DVD ...Audio from a device connected to The indicators on the front panel flash or light up, to Transmits infrared signals.
TV dramas, powerful sound during surround playback through Green (turned on) news programs or sports programs. Yamaha’s exclusive bass boost technology. Red ( standby) (p.11) Flash 3 times (enabled), flash once (disabled) Off (turned off)
The operation varies depending on the device. Refer to the operation manual of the device. Select “YAS-203 Yamaha” in the device list on the device. If a passkey (PIN) is required, enter the number “0000.” Perform the following steps to use a device with the sound bar.
Settings While pointing your TV’s remote control at the remote control sensor, hold down the mute key for more than 1 second twice or three times. Programming the sound bar with the TV’s remote Approx. 30 cm (1 ft) control (TV’s remote control learning function) TV’s remote control Once you program the sound bar, you can control it with your TV’s remote control for functions such as turning on/off the TV and sound bar simultaneously, or volume up/...
Teach the sound bar the “Volume (+)” code of the TV’s remote control. Clearing all programmed functions Press VOLUME (+) on the front panel of the sound bar. With the sound bar turned off, hold down the LEARN key on the sound bar’s remote control for more than 3 seconds (for entering the While pointing your TV’s remote control at the remote control sensor, hold learning mode).
Sending the TV’s remote signal through the sound Setting the auto power standby function bar (TV Remote Repeater function) By enabling the auto power standby function, you can avoid forgetting to turn off the sound bar after use, or if you fall asleep while watching TV. When the TV Remote Repeater function is enabled, the sound bar relays the TV’s remote signal received by the front sensor to the rear transmitter.
AC wall outlet and plug it you are experiencing is not listed below or if the instructions below do not help, turn off again.) the sound bar, disconnect the power cable, and contact the nearest authorized Yamaha The sound bar Another...
Yamaha dealer or service installation location of the subwoofer. center. If there is a device (microwave oven,...
Remote control The sound bar The TV’s remote control key was Hold down the key for more than 1 not held down long enough. second twice or three times (p.12). does not learn Problem Cause Remedy TV’s remote The TV’s remote control does not The TV’s remote control learning control The sound bar...
No sound is connection of the Perform connection sound bar with the device is operations again (p.10). produced or the Problem Cause Remedy disconnected. sound is interrupted is not selected as the Select as the input source. Cannot make the is not selected as the Select as the input source.
Pairing the sound bar and subwoofer manually With the sound bar turned on, hold down the SUBWOOFER PAIRING key on the sound bar’s remote control for more than 3 seconds. The SUBWOOFER indicator on the front panel of the sound bar flashes rapidly. Within 30 seconds, push the SUBWOOFER PAIRING button on the rear panel of the subwoofer for more than 3 seconds with a tapered object such as a hairpin.
Dynamic power 100 W China model: AC 220 V, 60 Hz Section Output Power 50 Hz China model: AC 220 V, Acoustic suspension type Advanced Yamaha Other models: 50 Hz Type (Non-magnetic shielding Active Servo Technology AC 220-240 V, 50/60 Hz Australia model:...
10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can We, Yamaha Music Europe GmbH hereby declare that this unit is in compliance with the essential be used without a license.
For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. * EEA: European Economic Area http://europe.yamaha.com/warranty/...