Operating Various Settings For This Unit (Setup Menu) - Yamaha HTR-6295 Owner's Manual

Operating various settings for this unit (Setup menu)

You can call the Setup menu using the remote control and change the settings of various menus.
For details, read "Basic operation of the Setup menu" first, and see the respective pages.
Menu/Submenu
Speaker Setup
Auto Setup (YPAO)
Manual Setup
Speaker Configuration
Speaker Level
Speaker Distance
Equalizer
Test Tone
Sound Setup
Dynamic Range
Lipsync
HDMI OUT1
HDMI OUT2
ANALOG MONITOR OUT
44
En
Sets items for speakers.
Automatically adjusts output characteristics of speakers.
Manually adjusts output characteristics of speakers.
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
Separately adjusts volume of each speaker.
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges of speakers and headphones.
Adjusts delay in output timing between video signals and audio signals.
Fine adjusts the delay time of automatic lipsync applied when only the HDMI
OUT 1 jack is used or when both the HDMI OUT 1 and HDMI OUT 2 jacks are
used.
Fine adjusts the delay time of automatic lipsync applied when only the HDMI
OUT 2 jack is used.
Adjusts the delay time applied when only the analog MONITOR OUT
(COMPONENT VIDEO or VIDEO) jacks are used.
Function Page
46
46
46
46
48
48
48
48
49
49
49
49
49
49