Operating Various Settings For This Unit (Setup Menu) - Yamaha RX-V665 Owner's Manual

Operating various settings for this unit (Setup menu)

You can call the setup menu using the remote control and change the settings of various menus.
You can change the following settings in the setup menu. For details, read "Basic operation of the setup menu" first, and
see the respective pages.
Menu/Submenu
Speaker Setup
1 Auto Setup (YPAO)
2 Manual Setup
A)Config
B)Level
C)Distance
D)Equalizer
E)Test Tone
Sound Setup
1 Dynamic Range
2 Lipsync
HDMI Auto
Auto Delay
Manual Delay
Function Setup
1 HDMI
Standby Through
Audio Output
Resolution
Aspect
2 Display
Dimmer
FL Scroll
OSD Shift
3 Volume
Adaptive DRC
Max Volume
Init. Volume
4 Input Rename
5 Zone2
Max Volume
Init. Volume
DSP Parameter
Memory Guard
50
En
Sets items for speakers.
Automatically adjusts output characteristics of speakers.
Manually adjusts output characteristics of speakers.
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
Separately adjusts volume of each speaker.
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges of speakers and headphones.
Adjusts delay in output timing between video signals and audio signals.
Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
Fine adjusts a delay time of HDMI Auto.
Manually fine adjusts the delay of audio and visual output.
Set various items for HDMI and display.
Sets various items for input sources.
Selects on or off of output of HDMI signals input from the HDMI IN jack to the
HDMI OUT jack when this unit is on standby.
Selects this unit or a component connected to this unit via the HDMI OUT jack of
this unit for reproducing sound signals input from the HDMI IN jack.
Sets resolution of the HDMI output that is converted from analogy visual input
signals.
Set an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
Set items for a monitor or the front panel display.
Sets brightness of the front panel display.
Selects the way to display characters on the front panel display.
Adjusts top and bottom positions of the screen displayed on the video monitor.
Sets items for volumes.
Adjust the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Changes input source names to be displayed on a video monitor or the front panel
display.
Sets the maximum volume level and initial volume level of Zone2.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Sets parameters for the sound field programs.
Protects some settings against accidental alteration.
Function Page
51
51
51
51
53
53
53
53
53
53
54
54
54
54
54
54
54
54
54
54
55
55
55
55
55
55
55
55
55
56
56
56
56
56