Operating Various Settings For This Unit (Setup Menu) - Yamaha RX-V1065 Owner's Manual

Operating various settings for this unit (Setup menu)

You can call the Setup menu using the remote control and change the settings of various menus.
For details, read "Basic operation of the Setup menu" first, and see the respective pages.
Menu/Submenu
Speaker Setup
Auto Setup (YPAO)
Manual Setup
Speaker Configuration
Speaker Level
Speaker Distance
Equalizer
Test Tone
Sound Setup
Dynamic Range
Lipsync
HDMI Auto Lipsync
Auto Delay
Manual Delay
Function Setup
HDMI
HDMI Control
Standby Through
Audio Output
Resolution
Aspect
Display
Dimmer
Front Panel Display Scroll
GUI Position
Volume
Adaptive DRC
Max Volume
Initial Volume
Input Rename
Zone2
Zone2 Max Volume
Zone2 Initial Volume
44
En
Sets items for speakers.
Automatically adjusts output characteristics of speakers.
Manually adjusts output characteristics of speakers.
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
Separately adjusts volume of each speaker.
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges of speakers and headphones.
Adjusts delay in output timing between video signals and audio signals.
Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
Fine adjusts a delay time of HDMI Auto.
Manually fine adjusts the delay of audio and visual output.
Sets various items for HDMI and display.
Sets various items for input sources.
Selects on or off of the HDMI control function when a component that supports
the HDMI control function is connected with this unit.
Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the
HDMI OUT jack when this unit is on standby.
Selects this unit or a component connected to the HDMI OUT jack of this unit for
reproducing sound signals.
Sets resolution of the HDMI output that is converted from analogy visual input
signals.
Set an aspect ratio of images reproduced by HDMI signals converted from analog
video input signals.
Sets items for a video monitor or the front panel display.
Sets brightness of the front panel display.
Selects the way to display characters on the front panel display.
Adjusts top and bottom positions of the GUI screen displayed on the video
monitor.
Sets items for volumes.
Adjusts the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Changes input source names to be displayed on the GUI screen or the front panel
display.
Sets the maximum volume level and initial volume level of Zone2.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Function Page
45
45
45
45
47
47
47
47
47
47
48
48
48
48
48
48
48
48
48
48
49
49
49
49
49
49
49
49
49
50
50
50
50