Operating The Unit By Tv's Remote Control (Hdmi Control) - Yamaha YSP-2700 Owner's Manual

1 2 3 4 5 6

Operating the unit by TV's remote control (HDMI control)

What is the HDMI control function?
The HDMI control function (link function) coordinates operation of a TV and the unit so
that the unit can be operated using the TV's remote control.
When a TV is connected to the unit with an HDMI cable, the TV's remote control can be
used to perform the following operations.
Coordinated functions via the TV remote control
1. Turn on/off
Both the TV and this unit turn on/off at the same time.
2. Switch input sources
• The unit's input source switches accordingly when the TV's input
source is switched.
Examples
– When a TV program is selected on the TV, the unit's audio input
source is switched to the HDMI OUT (ARC) jack using the ARC
function or TV input jack.
– When a BD/DVD player is connected to the HDMI IN 1 jack on the
unit, the unit's input source switches to HDMI 1 when the BD/DVD
player is selected with the TV's remote control.
• The input source can be switched while the unit is off.
3. Switch the audio output device
(TV or this unit (amplifier))
4. Adjust volume
This unit's volume can be adjusted when the TV's audio output is set
to this unit (amplifier).
• If, after several attempts, you are unable to operate the unit with your TV's remote control, change the
HDMI control setting for the unit, the TV, and any playback devices (p. 38).
In addition to the functions in the left column, the unit's menus displayed on the TV can
be operated with some TV.
• Even if your TV supports the HDMI control function, some functions may not be available. For details, refer
to documentation supplied with your TV.
• We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.
Remote control of TV (Example)
PREPARATIONS ➤ f Initial settings
37
En