Yamaha YSP-2700 Owner's Manual page 18

1 2 3 4 5 6
Installing the stands
If the center unit does not sit high enough, attach the stands supplied with the unit to
the center unit to increase the height at which it sits.
1
Remove the seal from the stand.
2
Align the protrusions on the stand with, and insert them into, the
holes on the rear panel.
Hole
Press firmly.
Seal
Protrusion
Install the left and right stands.
❑
Removing the stands
Pull the stands straight out.
PREPARATIONS ➤ a Installation
18
En