2-Channel Playback (Stereo Playback Mode); Delivering Sound To A Specified Location (Target Playback Mode) - Yamaha YSP-2700 Owner's Manual

2-channel playback (stereo playback mode)

2-channel stereo playback using the right front and left front
channels is enabled. When multi-channel audio signals are input,
they are down-mixed to 2 channels.
1
Press the STEREO key to switch to stereo playback
mode.
/
Delivering sound to a specified location
SURROUND
STEREO
(target playback mode)
TARGET
Target playback mode outputs sound beams from a single channel
for optimal listening from a specific position.
Refer to the illustrations below.
For listening at low volumes, such as at night
For clear sound at a distance
Play an input source, and adjust the beam angle.
1
Press the TARGET key.
2
Use the / key to adjust beam angle.
The angle to the left increases by 2 degrees each time the
key is pressed; the angle to the right increases by 2
degrees each time the key is pressed.
A maximum angle of 90 degrees in either direction is
possible.
Beam angle adjusted 16 degrees to the left
TARGET L16
Disabling target playback mode
Press the SURROUND key or STEREO key to turn target playback
mode off.
• The CINEMA DSP programs are not enabled in target playback mode.
• Bass output is controlled to prevent sounds from spreading in other directions.
PLAYBACK ➤ Enjoying sound based on your preference
42
En