Yamaha YSP-2700 Owner's Manual page 20

1 2 3 4 5 6
2
Attach the template supplied with this unit to the wall and use a thumbtack or pin to mark the position where screws will be inserted in the wall.
Template
Attach the template to the wall so that the center of
the template is aligned with the center of the TV.
3
Mount the wall mount bracket on the wall.
Screw self-tapping screws (not supplied) partway
into the wall where marked using the template.
The wall mount bracket is designed to be offset
slightly to the right of the center of this unit.
Mount the wall mount bracket on these
screws, and then tighten the screws.
Once screw position has been
marked, remove the template.
Screw self-tapping screws, at least six including the
two previously used, into as many holes around the
outer edges of the wall mount bracket as possible to
ensure sufficient strength.
PREPARATIONS ➤ a Installation
20
En