Rear Panel - Yamaha WXA-50 Owner's Manual

Rear panel

i
AC IN jack
1
For connecting the supplied power cable (p.13).
TRIGGER IN/OUT jacks
2
For connecting to an external device that supports the
trigger function (p.12).
Wireless switch
3
Turns on/off wireless communications (wireless LAN
connection and Bluetooth).
Position Function
Enables the wireless LAN and Bluetooth
connection.
Enables the Bluetooth connection only. Use a
wired LAN connection if connecting to a
network.
Disables the wireless LAN and Bluetooth
connection. Use a wired LAN connection if
connecting to a network.
Note
After changing this switch, be sure to disconnect the power cable
from the AC wall outlet and plug it again.
AUX IN jacks
4
For connecting to audio components (such as audio
players) equipped with analog output (p.12).
a b c d e
j k
AUX OUT jacks
5
For connecting to audio components (such as pre-main
amplifiers) equipped with analog input.
REMOTE IN jack
6
For connecting to an external component for remote
control.
By connecting an infrared receiver to the REMOTE IN jack,
you can operate the unit using the supplied remote control
even if the unit is stored out of sight.
SPEAKERS terminals
7
For connecting to speakers (p.11).
Wireless antenna
8
For a wireless (Wi-Fi) connection to a network and a
Bluetooth connection (p.4).
f g
l
7
En
h
OPT IN jack
9
For connecting to audio components equipped with optical
digital output (p.12).
NETWORK jack
:
For a wired connection to a network (p.15).
Note
▪ When using a wireless LAN connection (Wi-Fi), a wired LAN
connection is not necessary.
▪ When playing back high resolution contents (p.42) via the
network, we recommend using the wired network connection
for stable playback.
USB jack
A
For connecting a USB storage device (p.19).
SUBWOOFER jack
B
For connecting to a subwoofer with built-in amplifier
(p.12).