Yamaha WXA-50 Owner's Manual page 33

SETTINGS (Menu)
Initial Volume
Volume
Max Volume
Subwoofer Volume
Input Trim
Input Setting
Auto Play
Front Panel Operation
Remote
User Interface
LED Dimmer
Access device Indication
Bluetooth
Bluetooth
Audio Receive
Item Settings
Mode Off / On
Mute,
Level
-80 dB to +0.0 dB (0.5 dB steps)
-20 dB to +0.0 dB
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
Off / On / Auto
Off / On
Sensor Off / On
ID ID1 / ID2
0–3
-
Off / On
Standby Off / On
Private Mode Off / On
Disconnect -
Default
Enables/disables setting of the initial volume when the unit is
Off
turned on.
-40.0 dB Sets the initial volume for when the unit is turned on.
Sets an upper limit for the volume levels to which the unit can be
0.0 dB
adjusted using the remote control, etc.
0.0 dB Makes fine adjustments to the volume of the subwoofer.
0.0 dB Compensates for volume differences between input sources.
Sets whether or not audio is automatically played back from
servers, USB devices, etc. when the unit is turned on or the input
source is switched.
"Off": always starts up with playback stopped.
"On": always begins playing back the content that was played the
different for every input source
previous time.
"Auto": begins playback if audio was currently being played back
when the unit turned to standby.
Note
The setting value is different for every input source or service.
Enables/disables operation using the front panel (other than the
On
power key).
Enables/disables operation using the remote control. When this is
On
"Off", the unit can still be operated by other means.
Changes the ID of the remote control from which the unit receives
signals.
To change the ID of the remote control, set it as follows.
ID1
Set to ID1: on the remote control, hold down f and PRESET 1
at the same time for 5 seconds.
Set to ID2: on the remote control, hold down f and PRESET 2
at the same time for 5 seconds.
3 Adjusts the brightness of the LED ("3" is the brightest).
Lights the LED of the device currently being used for operation via
-
a web browser.
On Enables/disables the Bluetooth function.
Enables/disables the feature allowing the unit to be turned on by
On
Bluetooth devices (Bluetooth Standby).
Sets whether or not the unit responds to searches other than from
Off the paired Bluetooth device. When this is "On", the unit does not
respond to searches.
Terminates the Bluetooth connection between the Bluetooth device
-
and the unit.
33
En
Explanation