Yamaha WXA-50 Owner's Manual page 31

SETTINGS (Menu)
Front Panel Operation
User Interface
Remote
Access device Indication
Bluetooth
Bluetooth Audio Receive
Audio Send
Auto Power Standby
Other Setup
Fan Mode
Memory Guard
Network Info
Item Setting values
Off / On
Sensor Off / On
ID ID1 / ID2
-
Off / On
Standby Off / On
Private Mode Off / On
-
Disconnect
Off / On
Transmitter
Off / 20min / 2h /
4h / 8h / 12h
Off / Auto / On
Off / On
-
Default
Enables/disables operation using the front panel (other than the
On
power key).
Enables/disables operation using the remote control. When this is
On
"Off", the unit can still be operated by other means.
Changes the ID of the remote control from which the unit receives
signals.
To change the ID of the remote control, set it as follows.
ID1
Set to ID1: on the remote control, hold down f and PRESET 1
at the same time for 5 seconds.
Set to ID2: on the remote control, hold down f and PRESET 2
at the same time for 5 seconds.
Lights the LED of the device currently being used for operation via
-
a web browser.
On Enables/disables the Bluetooth function.
Enables/disables the feature allowing the unit to be turned on by
On
Bluetooth devices (Bluetooth Standby).
Sets whether or not the unit responds to searches other than from
Off the paired Bluetooth device. When this is "On", the unit does not
respond to searches.
Terminates the Bluetooth connection between the Bluetooth device
-
and the unit.
Off Enables/disables transmission of Bluetooth audio.
Sets the unit to be automatically set to standby mode when there
are no operations for a specified amount of time.
Off
When this is set to 20min, the unit will only be set to standby mode
automatically if there is no input signal during the 20 minutes
without any operations.
Auto Sets cooling fan operation to "Off", "Auto" or "On".
Protects the settings of the unit and prevents them from being
Off
modified.
Displays network information about the unit, such as its MAC
-
address.
31
En
Explanation