Playing Back Music With Airplay - Yamaha WXA-50 Owner's Manual

2
Turn on the Bluetooth function on the Bluetooth device, and
select "WXA-50 XXXXXX Bluetooth" in the Bluetooth device list
on the device.
"XXXXXX" represents a unique sequence of numbers and letters for your
unit.
-------
The Bluetooth indicator changes to lit in blue.
Note
If the unit has been registered with the MusicCast CONTROLLER, the room name entered during
registration appears on the Bluetooth device.
3
Play back music on the Bluetooth device.
Note
▪ Depending on your Bluetooth device, it may be necessary to select the unit as the audio output.
▪ Adjust the Bluetooth device volume as needed.
▪ To terminate the Bluetooth connection, hold down
When the connection is disconnected, the Bluetooth indicator flashes.
n
Enjoying music with Bluetooth® speakers/headphones
By establishing a Bluetooth connection between Bluetooth speakers/headphones and
the unit with the MusicCast CONTROLLER, you can enjoy music played back on the
unit with Bluetooth speakers/headphones.
1
Select an input source other than Bluetooth in the MusicCast
CONTROLLER screen and play back music on the unit.
(Bluetooth) on the remote control for 3 seconds.
2
Tap on the playback screen.
3
Select "Bluetooth Transmission" and enable the "Bluetooth
transmission" function.
4
Set the Bluetooth speakers/headphones to the pairing mode, and
then select the Bluetooth speakers/headphones to be connected
with the unit.
When the connection process finishes, the Bluetooth indicator changes to
lit in blue, and audio played back on the unit will be played back with the
Bluetooth speakers/headphones.
Note
▪ To terminate the Bluetooth connection, perform the disconnect operation on the Bluetooth
speakers/headphones.
▪ AirPlay and DSD audio cannot be delivered.

Playing back music with AirPlay

The AirPlay function allows you to play back iTunes or iPhone music on the unit via a
network.
iTunes
PC
(Wired network or wireless network)
iPhone/iPad/iPod touch
23
En
Router
The unit