Error Messages - Panasonic KX-TG2438CN Operating Instructions Manual

2.4ghz digital cordless answering system
Table of Contents

Advertisement

Error messages

If the unit detects a problem, one of the following messages will be displayed on the handset.
Display message
Busy
Error!!
---Incomplete---
Phonebook full
No link to base.
Move closer to
base, try again.
Phonebook full
No items stored
Please lift up and
try again.
System is busy.
Please try again
later.
Dial locked
*1 KX-TG2439CN only
Cause & solution
L The called handset is in use.
L The handset you tried to copy phonebook items to is in
*1
use.
L The handset you are calling is too far from the base
*1
unit.
L When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the
handset and the base unit away from the electrical
appliances and try again.
L The other handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 24).
L The entered password was wrong in programming dial
lock. Enter the correct password.
L When the phonebook item(s) was(were) sent to another
handset, the handset's phonebook memory was full
and copying stopped. Press {OFF} to exit. Erase items
from the other handset's phonebook (page 23). When
phonebook memory is available, you can copy all
phonebook items (page 25) or individual items one by
*1
one (page 24).
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit's AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset's registration may have been canceled.
Re-register the handset (page 37).
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 23).
L Your phonebook or redial list is empty.
L A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
L More than one unit is in use. Try again later.
L Another user is listening to messages. Try again later.
L Dial lock is turned on. To turn it off, see page 37.
Useful Information
*1
*1
*1
53

Advertisement

Table of Contents
loading

Table of Contents