Table of Contents
Advertisement
Problem
Time setting is erased,
and "E Press MENU."
flashes on the handset
display and "E" flashes
on the base unit display.
Answering system
Problem
I cannot listen to
messages from a remote
location.
The other party
complains that they
cannot leave a voice
message.
"E" flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
I cannot operate the
answering system.
During message
playback, the unit rings
and cancels playback.
The message indicator
on the handset flashes
slowly.
When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.
Cause & solution
L If a power failure occurs, time setting may be erased.
Set the date and time again (page 16).
Cause & solution
L A touch tone phone is required for remote operation.
L Press the remote code correctly and press each key
firmly (page 46).
L The answering system is off. Turn it on (page 47).
L The recording time is set to "Greeting only". Select
"1min", "2min", or "3min" (page 48).
L The memory is full. Erase unnecessary messages
(page 43).
L Message memory is full. Erase unnecessary messages
(page 43).
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
L A call is being received. Answer the call and start again
from the beginning after hanging up.
L New messages have been recorded. Listen to the new
messages (page 43) or turn the message alert off
(page 49).
L Set the date and time again (page 16).
Useful Information
57
Advertisement
Table of Contents
