Electrolux EKI6751AOX User Manual page 38

38 www.electrolux.com
Use a screwdriver to adjust the wheels
(1). Use a key to adjust the small feet on
the bottom of the appliance (2).
13.3 Anti-tilt protection
CAUTION!
Install the anti-tilt protection
to prevent the appliance
from falling under incorrect
loads. The anti-tilt protection
only works when the
appliance is put in a correct
area.
Your appliance has the
symbols shown on the
pictures (if applicable) to
remind you about the
installation of the anti-tilt
protection.
1
Make sure that the surface behind the
appliance is smooth.
2
1. Set the correct height and area for
2. Install the anti-tilt protection 77 mm
3. You can find the hole on the left side
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
the appliance before you attach the
anti-tilt protection.
down from the top surface of the
appliance and 49 mm from the left
side of the appliance into the circular
hole on the bracket. See the
illustration. Screw it into the solid
material or use applicable
reinforcement (wall).
at the back of the appliance. See the
illustration. Lift the front of the
appliance (1) and put it in the middle
of the space between the cupboards
(2). If the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the
side measurement to centre the
appliance.
49 mm
77 mm
2
1