Enhanced Messages - Digital Projection TITAN SX+ 3D, DUAL 3D ULTRA CONTRAST User Manual

7. Appendix

Enhanced Messages

Enhanced messages are constructed using the following format:
Header
2 bytes
Data BE EF
Byte # 1 2
Data
n bytes
Data Data bytes ...
Byte # 12 ...
Header is always EFBEh (byte 0 = BEh and byte 1 = EFh)
Type is always 10h for Enhanced Messages
CRC can be set to 5858h if you want the CRC to be ignored. However, the CRC
should ideally be calculated, as described in the Titan Projector Series External
Control Protocol.
Size is always Data Length + 4 (4 bytes after CRC and before data)
Page 7.18
Digital Projection
Type Size
1 byte 2 bytes
10 XX XX
3 4 5
... ...
... 11 + n
TITAN sx+ 3D, Dual 3D, Ultra Contrast
CRC Data type
2 bytes 2 bytes
58 58 00
6 7 8
User Manual
Data length (n)
2 bytes
00 00 00
9 10 11
Notes
The following pages contain
examples of some basic
Operation commands.
For full details of all the For
full details of all the Operation
commands and Enhanced
commands, contact Digital
Projection and ask for a copy
of the Titan Projector Series
External Control Protocol.
Rev C April 2011