Dhcp; Ip Address - Digital Projection TITAN SX+ 3D, DUAL 3D ULTRA CONTRAST User Manual

For important information about how Input 8 is used, see
TITAN sx+ 3D, Dual 3D, Ultra Contrast
Digital Projection
Setup menu, Network continued

DHCp

•
Press and to select DHCP
Press to open the DHCP control box.
Press and to select from:
On
Off
Press to apply the new DHCP setting.
or Cancel
Press or to exit without making the change.

Ip Address

•
Press and to select IP Address
Press to open the IP Address control box.
Use and to select each number in turn.
Use and to adjust the number
then move to the next number.
Use and to select from
Apply
Press to apply the new IP Address.
or Cancel
Press or to exit without making the change.
Rev C April 2011
INPUT 8 in the Notes column
User Manual
, and also Section 4, Overview.
4. Controlling the projector
Notes
IP Address cannot be changed
if DHCP is set to ON.
DHCP will set the the address,
which will be displayed for
information only.
Page 4.51