Safety Instructions - Zanussi ZWT 71401 WA User Manual

Washer dryer
Hide thumbs Also See for ZWT 71401 WA:
Table of Contents

Advertisement

Available languages

Available languages

Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes or
pillows fitted with foam rubber pads should not be dried in the
wash dryer.
Fabric softeners, or similar products, should be used as
specified by the fabric softener instructions.
Remove all objects from pockets such as lighters and matches.
Never stop the wash dryer before the end of the drying cycle
unless all items are quickly removed and spread out so that the
heat is dissipated.
The final part of a wash dryer cycle occurs without heat (cool
down cycle) to ensure that the items are left at a temperature
that ensures that the items will not be damaged.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Before maintenance, deactivate the appliance and disconnect
the mains plug from the mains socket.

Safety Instructions

Installation
• Remove all the packaging and the transit
bolts.
• Keep the transit bolts. When you move the
appliance again you must block the drum.
• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.
• Make sure that the floor where you install the
appliance is flat, stable, heat resistant and
clean.
• Do not install the appliance where the
appliance door can not be fully opened.
• Always move the appliance vertically.
• The rear surface of the appliance must be
put against the wall.
• Make sure that there is air circulation
between the appliance and the floor.
4
• Adjust the feet to have the necessary space
between the appliance and the carpet.
• When the appliance is put in its permanent
position, check if it is fully level with the aid
of a spirit level. If it is not, adjust the feet until
it is.
Electrical Connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and
extension cables.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Do not touch the mains cable or the mains
plug with wet hands.
• Only for UK and Ireland: The appliance has a
13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.
www.zanussi.com

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents