Replacing the dust bag
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the
highest suction power is selected, the dust bag must
be changed, even though it may not yet be full. In this
case, a bag change is necessary due to the type of
material being collected. The nozzle, suction pipe and
flexible hose must not be blocked, as this causes the
dust bag change indicator to come on.
Attention: The dust bag change indicator only
works correctly in conjunction with a dust bag.
Open the lid by moving the locking lever in the
direction of the arrow.
Seal the dust bag by pulling the locking tab and then
Slide the new dust bag into the holder to the stop.
Attention: The dust bag compartment lid will only
close when a dust bag or cloth filter or dust
collector is fitted.