Changing The Dust Bag - Siemens Z 6.0 VSZ61260 Instruction Manual

When the work is done

Changing the dust bag

14
To adjust the length of the telescopic tube, press
the adjusting sleeve in the direction of the arrow
and adjust the tube to the required length.
Replacing the dust bag
If the dust bag change indicator lights up
continuously when the floor tool is lifted from the
floor and the highest suction power is selected,
the dust bag must be changed, even though it may
not yet be full. In this case it is essential to change
the dust bag due to the type of material it contains.
First check that the nozzle, suction tube and flexible
hose are not blocked, as this would also lead to the
dust bag change indicator being triggered.
When the open button is pressed, the appliance
lid raises slightly.
en
en