Using the dust collector
Cleaning the permanent filters and microfilters
Refit the dust collector to the vacuum cleaner, push in
the carrying handle and close the lid.
Attention: After repeated vacuuming, the dust
collector can become scratched on the inside and
appear milky. This does not, however, affect the
performance of the vacuum cleaner in any way,
i.e. it will continue to function as normal.
When must the filters be cleaned:
After any operating problem, i.e. after a blockage is
At least every six months.
Unlock the filter holder by pressing the two lugs in the
direction of the arrow and open it.