Changing The Filter; Replacing The Dust Bag - Siemens VS Z5 Instruction Manual

Changing the filter

18
22

Replacing the dust bag

Please note: Always switch off
!
the appliance before changing
the filter.
18
Figure
●
If the dust bag change indicator
lights up red continuously when
the floor tool is lifted from the
floor and the highest power set-
ting has been selected, the dust
bag must be changed, even
though it may not yet be full.
Even if the dust bag is not full, it
may still need changing, due to
the type of dust which has been
vacuumed.
First check that the nozzle,
suction pipe and flexible hose
are not blocked, as this would
also lead to the dust bag change
indicator being triggered.
●
The handle
detached from the hose to
remove blockages.
can easily be