Additional Mac Audio Settings - Audio Technica AT-LP60-USB Software Manual

Additional MAC audio settings

We have set the Audacity playback and record settings. Now it's time to set the
separate Macintosh audio playback and record settings.
1. Go to Applications > Utilities >
2. In the Audio Midi window under the tab
• Under System Settings, Default Input, select
• Under System Settings, Properties For, select
• Under Default output, select
• For System output, select Built-in
This will allow other programs (in addition to Audacity) to use your Mac's internal sound
card for audio output.
6
then select and open Audio MIDI Setup.
Devices, select the following:
Audio
USB Audio CODEC.
USB Audio CODEC.
Built-in Audio, or Built-in Output.
Audio.
NOTE: The screens shown are from Audacity 1.2.6; later versions of Audacity
may change.