Installing Audacity Software For Mac Osx And Above - Audio Technica AT-LP60-USB Software Manual

1. Before installing software, assemble the turntable, following directions in the
included Owners Manual.
2. Plug the AC cord on your turntable into an AC power outlet.
3. Next, use the included USB cable to connect the turntable to your Mac's USB port.
USB
RCA
4. If you have external self-powered speakers, make certain they are plugged into
your computer's audio input or into the line-out RCA plugs of the USB turntable, and
that the Phono/Line switch on your turntable is switched to Line. (Audacity offers
a software play-through feature that allows you to listen to the album through your
computer while recording, even if you don't have external speakers.) If your computer
has a headphone output, you can choose to monitor your recording with headphones.
NOTE:
On the AT-LP240-USB, the RCA cables are not permanently attached to the turn-
table; they plug into the RCA jacks on the back of the turntable. See the AT-LP240-USB
owner's manual for cable connection instructions.
AC
USB cable (included)
Typical connection for: Speakers with
RCA inputs

Installing Audacity software for MAC OSX and above

Cables
Red to Red
White to White
5. Turn your computer on.
6. Insert the included Audacity CD in your Mac's CD drive. Open the CD icon on your
desktop. Drag the installation folder for Audacity to your applications folder.
When the files have been copied, eject the CD.
Typical connection for:
Speakers with 3.5 mm
stereo input
(using adapter cable)
Included adapter cable (RCA
to 3.5 mm stereo male)
3