Audio Technica AT-LP60-USB Software Manual page 14

Setting up your PC to work with Audacity
4. Next, select Quality tab at the top.
• Default Sample Rate: 44100
• Default Sample Format: 16-bit.
• Real-time sample rate converter:
• High-quality sample rate converter:
• Real-time dither: None.
• High-quality dither: Triangle.
• Select OK to save settings and exit Preferences menu.
14
Hz.
Fast Sinc Interpolation.
High-quality Sinc Interpolation.
5. Next, from the main Audacity window, select the drop-down box (arrow
pointing down) next to the microphone near the middle of your screen.
• If you don't see the drop-down box or the microphone pictured above, return
to Preferences Menu (see step 2, page 21). Select the Interface tab.
Enable Meter Toolbar. This will allow you to see the microphone with the
drop-down box on your main screen.
• Select Monitor Input from the drop-down menu.
select this setting every time you launch Audacity. The other settings selected
above will be saved when you exit the program.
NOTE: The screens shown are from Audacity 1.2.6; later versions of Audacity
may change.
Check
NOTE: You will need to