Audio Technica AT-LP60-USB Software Manual page 5

4. Next, select Quality tab at the top.
• Default Sample Rate: 44100 Hz.
• Default Sample Format: 16-bit.
• Real-time sample rate converter:
• High-quality sample rate converter:
• Real-time dither: None.
• High-quality dither: Triangle.
• Select OK to save settings and exit
Setting up your MAC (OSX and above) to work with your USB Turntable
Fast Sinc Interpolation.
High-quality Sinc Interpolation.
Preferences menu.
5. Next, from the main Audacity window, select the drop-down box (arrow pointing
down) next to the microphone at the right side of your screen.
• If you don't see the drop-down box or the microphone pictured below, return
to Preferences Menu (see step 2, page 17). Select the
Enable Meter Toolbar. This will allow you to see the microphone with the
drop-down box on your main screen.
6. Select from the drop-down menu.
Monitor Input
this setting every time you launch Audacity. The other settings selected above will
be saved when you exit the program.
NOTE: The screens shown are from Audacity 1.2.6; later versions of Audacity
may change.
Interface tab. Check
You will need to select
NOTE:
5