Wiring - Siemens SIMATIC ET 200SP Manual

Wiring

This section provides information on the pin assignment of the individual interfaces and the
block diagram of the CPU 1510SP-1 PN.
24 V DC supply voltage (X80)
The connector for the supply voltage is plugged in when the CPU ships from the factory.
The following figure shows the pin assignment for a 24 V DC supply voltage.
①
②
③
④
⑤
Internally jumpered:
①
and
③
and
Figure 3-1
22
Ground of the supply voltage
Ground of the supply voltage for loop-through (permitted value 10 A)
+ 24 V DC of the supply voltage for loop-through (permitted value 10 A)
Spring NC contacts
+ 24 V DC of the supply voltage
②
⑤
Supply voltage connection
CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)
Manual, 12/2014, A5E35264953-AA
3